Worldwide Dealers   Mic Pres | Compressor Limiters | EQs | Combo Units | Mics | DIs | Mastering | Starbird Boom | Amps | Mixers

Langevin ELOP® Stereo Electro-Optical Limiter Front panel up-close | Owner's Manual Features And Specifications | Suggested Retail Price | Langevin FAQ  Set it and forget it! Our Langevin ELOP® Limiter makes your job easy. The principle of operation is based around using a rectified sample of the audio to shine an LED (Light Emitting Diode) onto an LDR (Light Dependent Resistor). The photo-resistor in combination with a fixed resistor simply act as a changing voltage divider to attenuate the signal--  like a smart volume control. A similar principle was found in the older Teletronix®** & Urei LA-2A®**, LA-3, and LA-4 units which used a slower electro-luminescent panel-light on a conventional LDR encased in a light-tight enclosure. Ours uses modern VACTROL technology (but with a trick!) for exact sample-to-sample tracking and no high frequency loss while digging deep into limiting--  problems commonly associated with older LA-series limiters and other opto-based units.  The audio signal passes only through all-discrete Class A amplifiers in the Langevin version. Each channel can be run separately or switched to “stereo - link ”. Due to their inherently quick attack, these Electro-Optical Limiters are skilled soldiers for tracking vocals or individual instruments.    In the summer of 2000 we ditched the superfluous "balance control". You might also consider some of our other limiters and compressors: READ ME: WHICH LIMITER SHOULD I BUY???????????????? Check out the all-tube Manley Stereo ELOP® Limiter  Check out the Langevin Dual Vocal Combo which is a Langevin ELOP® Limiter coupled to a Langevin Dual Micpre with EQ.

TECHNICAL DOCUMENTS:

Owner's Manual

There were about 20 units built in 1993-1994 that used a different discrete line amplifier. These units had GREEN printed circuit boards and had UNbalanced in's and outs. Serial codes for those oldies are LOPTO001 through LOPTO021. 
Here is a page to help you calibrate those units.

Langevin FAQ

We frequently get asked a number of questions regarding Langevin, including the proper pronunciation of the name. (the “g” is soft like in “gelatin” or “orange”).

Langevin was one of the original pro audio manufacturers dating back to WWII. In that era there were far fewer audio manufacturers and Langevin gear was very popular and especially respected in the broadcast industry. There were very few recording studios then and most of them relied on Langevin, Altec, Fairchild, and other great brands as well as home-made gear. Early Langevin equipment was vacuum tube based and later became mostly discrete transistor based. Today, you can often find vintage Langevin pieces still in use after all this time.

Are these the exact same circuits as the vintage pieces?

The mic preamplifier and EQ borrow some ideas from the old circuits but are not identical at all. We designed new gain blocks to deal with the balanced/unbalanced saga better than they used to in the olden days. And of course, we use new parts! Transistors, pots and most components have become significantly improved over the last 30 years. The limiter is a blend of the old discrete style of Langevin discrete and the also vintage “LA” series of Levelling Amplifiers. Manley developed a similar opto-based limiter and has used it in the Manley ELOP^® Limiter, Langevin ELOP^® Limiter, Langevin Dual Vocal Combo, and the VOXBOX^® limiter / de-esser section.

What's the difference between a Manley Pultec or ELOP^® Limiter and a Langevin one?

The Manley units are all-tube while the Langevin units have all-discrete make up gain amplifiers. The EQ or limiting and metering sections are all the same Manley-to-Langevin. Your choice becomes between the sound of discrete transistor cicuitry in the Langevin gear or vacuum tubes with and without transformers in the Manley gear. Different flavours, but all build side-by-side with all high quality parts and reliable construction techniques at the Manley Labs factory. Take an on-line factory tour here!

Do we support any of the vintage Langevin products?

Sorry, no. We just bought the name and rights to use any of the old circuits. We didn’t build the old stuff and never have had parts or real documentation. The usual experts on vintage gear and restoration are your best bet.

 Top | Pro Main Page | Manley Home

ELOP^® Limiter or Variable Mu^® Limiter Compressor? Which one is for me?

You've probably heard someone say, "You've gotta get the Manley compressor." Now you've found out we make two completely different stereo units yet each unit has its own following. (And then there are the fanatics that own both of 'em...) But when you can only get one, the choice really depends on what you need a dynamics processor for. If your requirements include compressing your 2-Buss, drums, or making this your day-to-day compressor, the Variable Mu^®  Limiter Compressor is your clear choice. Why? Because when used more than a few dB, the ELOP^® Limiter's fast attack time will want to grab fast transients first (like drums) from a mix and throw them back into the next room behind the speakers. The Variable Mu^® Limiter Compressor has adjustable attack and release which have optimised settings for mixing and mastering but are flexible enough and also go fast enough for most tracking situations. This makes the Variable Mu^® Limiter Compressor one truly versatile machine.

You might think having every control in the world is what you need, but if recording vocals is your main focus or if you're doing live work, your goal is to be ready not to miss 'that moment'. The ELOP^® Limiter is idea for recording and tracking because it is incredibly easy to use, and hard to get it wrong. It seems to do the right thing at the right time-- no regrets. Peak limiting of individual instruments especially vocals, room mics on drums, and good ol' mega-squashing effects are the daily duties of the ELOP^® Limiter.

The most common mistake most people make when buying a compressor is getting wrapped up in specs and theory. Remember, that the real goal is cool music and great sounds, not knobs and numbers. Time to stop thinking and start listening!

READ MORE: WHICH LIMITER SHOULD I BUY????????????????

Check out the Manley Variable MU^® Limiter Compressor

Check out the Manley ELOP^® Limiter

Check out the Langevin Dual Vocal Combo

Manley or Langevin? What's the deal? Read the Langevin FAQ.

Top | Pro Main Page | Manley Home

**LA-2A^® and TELETRONIX^®are registered trademarks belonging to William Putnam.